ISO-10303-21;
HEADER;
FILE_DESCRIPTION( (''), '2;1');
FILE_NAME( 'DRY80-A DN125 PN10 16 DKY.stp', '2025-07-21T11:23:47+03:00', (''), (''), 'ST-DEVELOPER v20', 'Autodesk Inventor 2025', '');
FILE_SCHEMA (('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#131378=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.000393700787401575), #131384,'DISTANCE_ACCURACY_VALUE', 'Maximum model space distance between geometric entities at asserted c
onnectivities');
#131380=( GEOMETRIC_REPRESENTATION_CONTEXT(3) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#131378)) GLOBAL_UNIT_ASSIGNED_CONTEXT((#131384,#131388,#131389)) REPRESENTATION_CONTEXT('','3D') );
#131382=DIMENSIONAL_EXPONENTS(1.,0.,0.,0.,0.,0.,0.);
#131384=( CONVERSION_BASED_UNIT('inch',#131387) LENGTH_UNIT() NAMED_UNIT(#131382) );
#131385=( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );
#131387=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(25.4),#131385);
#131388=( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );
#131389=( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );
#131391=PRODUCT_DEFINITION_SHAPE('',$,#131394);
#131393=DESIGN_CONTEXT('part definition',#131398,'design');
#131394=PRODUCT_DEFINITION('DRY80-A DN125 PN10 16 DKY', 'DRY80-A DN125 PN10 16 DKY',#131395,#131393);
#131395=PRODUCT_DEFINITION_FORMATION('',$,#131400);
#131396=PRODUCT_RELATED_PRODUCT_CATEGORY('DRY80-A DN125 PN10 16 DKY', 'DRY80-A DN125 PN10 16 DKY',(#131400));
#131397=APPLICATION_PROTOCOL_DEFINITION('international standard', 'ap203_configuration_controlled_3d_design_of_mechanical_parts_and_asse
mblies_mim_lf',2004,#131398);
#131398=APPLICATION_CONTEXT( 'Configuration Controlled 3D Design of Mechanical Parts and Assemblies');
#131399=MECHANICAL_CONTEXT('part definition',#131398,'mechanical');
#131400=PRODUCT('DRY80-A DN125 PN10 16 DKY','DRY80-A DN125 PN10 16 DKY', $,(#131399));
ENDSEC;
END-ISO-10303-21;